
A two-piece telescopic gift box: a shallow tray, and a cover that drops over it from above. The cover travels down until its skirt reaches roughly three quarters of the base height, so a narrow band of the tray stays visible all the way round when the box is closed. There is no rim band, no hinge, no magnet and no ribbon. It is built for small gifts, supplement and wellness bottles, and cosmetic jars.
Structure: Two Pieces, One Joint Line
The box is made of two parts and nothing else.
- Base — a shallow tray with four walls and a paper liner laid in the bottom.
- Cover — a lid with no bottom board, sized slightly larger than the tray so it drops over it.
The clearance between cover and tray is even on all four sides, which is why the step reads the same from any face of the closed box. Look inside the tray and the wall you see is the tray wall itself; there is no second layer of board behind it. That is the difference between this box and a rimmed construction, and it is the first thing to check on a sample.

Measurements Of The Closed Box
| Reference | Value |
|---|---|
| Length x width x height | 11 x 9 x 4 cm |
| Cover skirt, share of base height | about three quarters |
| Tray band visible when closed | the remaining quarter, even on all four sides |
| Pieces | two |
| Closure | lift-off cover, no hinge |
Dimensions are taken on the closed box. Because the cover and the tray are cut from the same dieline, the fit repeats from batch to batch.

Material And Finish
Textured specialty paper is wrapped over grey board, with an embossed floral grain running across the face. The grain is what makes the surface read as fabric rather than as printed board, and it takes hot foil, colour foil, blind emboss and screen printing cleanly because the foil sits on the raised pattern instead of on a flat sheet.
The standard liner is a plain light paper pad. A die-cut cavity can be tooled instead, shaped to a bottle, an ampoule tray or a jar.
Printing And Branding
Artwork can go on the cover face, on the cover skirt, or on both.
- Hot foil and colour foil
- Blind emboss and deboss
- UV and screen print
- Pantone matching on the paper wrap and on the foil
Send artwork as AI, PDF or CDR with fonts outlined.
What It Packs
- Small gifts and corporate giveaways
- Health supplements and wellness products, including nutrition drinks in short bottles
- Cosmetic creams, serums and sample sets
The tray is shallow, which suits flat or short products. Taller bottles need a different proportion, not a deeper box on the same footprint; the liner and the cover clearance are what decide whether a bottle stands upright inside.
Ordering And Sampling
Minimum order is 300 pieces per design for the stock size. An artwork proof and a pre-production sample are approved before bulk production. Quantities, lead time and freight are confirmed on the quotation.
Quality
Our quality system is certified to ISO 9001:2015, registration ZYC24Q00141R1S. We have been making paper packaging since 2004, with prepress, sample making and assembly running under one roof in Baiyun, Guangzhou.
Related Reading
- Half lid packaging box — the same closure family on a smaller square footprint.
- Custom paper gift packaging box — the same half lid with a satin interior.
- Supplement bottle gift box — why a deeper box is usually the wrong fix for a tall bottle.
Notes
Dimensions are for the closed box. Cover-to-tray clearance, board thickness and liner depth are confirmed on the pre-production sample. Colour on textured paper reads slightly darker than on a flat sheet; a physical proof is the reference.














Reviews
There are no reviews yet.