In fact, according to the inspection criteria of the packaging factory, we can basically judge whether a batch of large Customized clothes gift bag are qualified products by looking at only two positions. Maybe many small partners will say that it is just the quality and color difference. It is understandable that these two points are the most prominent problems in many customized paper bag. If these are not done well, let alone in-depth discussion, But today, let’s put these two simple ones aside. Let’s talk about the other two in-depth impacts, which we commonly call the second inspection gate.
1. Glue bonding at the beer mouth. At present, many Customized clothes gift bag on the market are customized with a piece of paper, and then through the beer process, the knife mold is used to cut some creases, so that the paper bag can be folded, and then glued together with glue. This crease can allow the gift bag to be folded freely, but we can make beer marks on these paper bags, usually the crease in the middle of the two ends of the paper bag, which is actually made through the beer process, However, for the sake of effect, the master with excellent craftsmanship did not make the crease in the middle from the top to the bottom, but only made it 7~10cm from the bottom. This was to make the bottom close. Although the craftsmanship was very difficult, it also meant that it was easy to have problems. When you got the paper bag, you can try to fold the position several times to see if it was cracked or the glue failed, This is a very test of the craftsmanship of the handbag maker.
2. The opening distance of corns, which seems to be a very simple process, is a very important operation in the process of making Customized clothes gift bag. The most taboo for our consumers is that the paper bag is broken or broken, which really affects the consumer experience and the brand image. Therefore, the paper bag customization needs to ensure this basic function. Most of the time, the broken corns of the paper bag are not the hand ropes, but the corns of the paper bag can not hold, The opening of the paper bag was torn, so at this time, the master was very particular about the control distance of the corns, the parallelism and the distance from the mouth of the bag. This specific value is hard to say, because it depends on the size of the paper bag, so that the force on each corns is uniform, rather than one or two alone bear all the forces, so it is easy to have problems, and it is a poor product.
The above two points are considered in the second level of inspection after the Customized clothes gift bag are customized. They can also be used to determine the quality of a paper bag and the level of the factory’s process. They are very directional measurement standards.