What This Luxury Paper Box Is
A square rigid box built around one idea: the stiffening should be felt, not seen. Outside it measures 9 x 9 x 5 cm and is wrapped in matte black art paper. Open it and you find three parts: a tray, a paper rim band and a shallow lid. Close it and the three read as a single block.
| Outside size | 9 x 9 x 5 cm (square plan) |
|---|---|
| Structure | Rimmed lid and base, three parts |
| Board and wrap | Grey board, matte black art paper |
| Side read when closed | Two segments, one hairline seam near mid height |
| Interior | Plain tray, insert optional |
| MOQ | 300 pcs standard size |
Three Parts: Tray, Rim Band and Lid
The tray is a board shell with a floor and four walls, wrapped in paper on the outside and finished in the same colour inside. The rim is a ring of board with no floor and no top panel; it is set against the inner face of the tray wall, its lower edge resting on the tray floor while its upper edge rises a little above the tray mouth. The lid is a shallow cap: one top panel and four skirts, no bottom panel.
Because the rim carries no panels of its own, it never appears as a separate layer from outside. What it does is double the paper thickness at the mouth, which is where a thin box usually gives first when a heavy object is lifted out.
The Rim Sits Inside the Tray Wall
Position matters more than thickness here. The rim is not a wrap band around the outside of the tray, and it is not a collar that stands proud of the body. It faces inward. Once the lid drops on, its skirt passes outside the tray wall and covers the rim completely, so the outside surface you touch is the tray and the lid only.
The inner face of the rim becomes the visible wall of the cavity. That is why, with the lid off, you see a wall that runs from the tray floor up past the tray edge, and a separate inner edge line where the rim ends. That line is the only place the rim shows itself.
Closed, the Side Reads as Two Segments
Run a finger down the closed side and you cross two surfaces with one joint between them: the lid skirt above, the tray below. The joint sits close to the middle of the side, because the skirt is cut about as deep as the visible height of the tray. Nothing else interrupts the profile — no second dark line, no band, no step, no lip.
This is the readable test for the box type. If a closed box shows three bands of tone on its side, the rim is exposed and the box belongs to a different family. If it shows a step where the lid overhangs the body, the lid is oversized. Ours is flush and plain, which is the whole point of the design.
How It Sits Beside Half-Lid and Full-Lid Boxes
Three lid-and-base boxes look similar in a photograph and behave very differently on a shelf.
- Half-lid: the lid covers roughly the upper half of the tray, so the lower tray stays visible and the side reads as three tone bands. See the half-lid paper gift box.
- Full-lid: the skirt runs all the way to the bottom edge, so the tray is only visible when the box is opened.
- Rimmed, rim hidden: this box. The skirt stops around mid height and the rim stays inside, so the outside is quiet and the cavity is stiff.
If your retail display depends on showing the base colour, a half-lid is the better choice. If the box is opened by the buyer and the first impression is the interior, this one gives you a cleaner outer face and a reinforced mouth.
Grey Board Wrapped in Matte Black Paper
The shell is formed from grey board, then wrapped in matte art paper with the edges turned in and pressed flat. Board thickness is selected in the 1.5 to 2.0 mm range for this size; the exact board is set per order. The wrap is the same black on all three parts, so seams disappear into the colour rather than being hidden by print.
Matte black is the standard finish and the one photographed here. Any paper colour is possible, including Pantone matching, and the interior can be kept the same tone or taken darker for contrast.
9 x 9 x 5 cm, and Any Size You Need
The standard size is a square 9 x 9 x 5 cm with a plan ratio of 1.000, which stacks predictably and packs without wasting carton space. Nested cartons are built at 11 x 11 x 7 cm to leave cushioning on every face.
Size is the most frequently changed item in this range, and changing it does not change the structure: the same tray, rim and lid are re-cut to new panels. Give us the product dimensions and we work back from the object, allowing for the insert if there is one.
| Rings and earrings | Standard 9 x 9 x 5 cm works as it is |
|---|---|
| Small perfume bottle or watch | Height set from the object; plan from its outline plus clearance |
| Several pieces stacked | Height set from the stack; insert cut with individual seats |
Finishing on the Lid Top
The lid top photographed here carries a UV cured geometric relief pattern with lettering. The lettering on the sample belongs to another brand and is replaced with JUNYE or left plain on your order.
Available finishing, all applied to your artwork: spot or full UV coating, hot foil stamping in gold, silver or coloured foils, embossing and debossing, silk screen printing, and Pantone spot colours. Finishing can also run onto the skirt or the inside of the tray where it helps the unboxing.
A Plain Tray, With an Insert on Request
As photographed, the tray is plain: floor and walls in the same finish, no flocking, no dividers, no platform. That suits a box that is meant to be opened and read at a glance.
An insert is available and is quoted separately. Paper, EVA, sponge or velvet, cut to the outline of your product, with seats for one item or several. Where the product needs protection in transit, the insert is usually the cheaper way to get it than a thicker board.
What Fits Inside
Small, high value objects suit this size best: rings, earrings, necklaces and bracelets, cufflinks, a small perfume bottle, a watch, commemorative coins, essential oil sets, small craft pieces. Square boxes also stack well for seasonal gift programmes and corporate VIP sets.
What it is not built for: oversized or heavy items, multi-piece sets that need divided protection without an insert, and liquids unless they are sealed by the buyer first.
Minimum Order and Lead Time
Minimum order is 300 pcs for the standard size. A custom size starts at 500 pcs. A new logo, a special colour or a new die starts at 1,000 pcs, with or without an insert.
Lead time is agreed at order and confirmed once the artwork and the sample are approved; it depends on the finishing and on the quantity band you book. Prices are quoted against your specification rather than published, because board, wrap, finishing and insert all move independently.
Artwork, Mockup and Sample
Artwork checking, a 3D mockup and the die-cut drawing are free of charge. A physical sample is produced and approved before the production run starts, so the board, the wrap and the seam position are signed off on a real box rather than on a screen.
To quote accurately we need: product dimensions or a sample, the artwork or logo file, the colour reference, whether an insert is required, and the target quantity band.
Quality and Compliance Documents
Documents held on file: ISO 9001:2015 certificate ZYC24Q00141R1S, valid to 2027-11-28, covering paper packaging boxes (excluding food contact inner boxes) and paper bags; EU RoHS test reports; German LUCID registration DE2463045771631; French CITEO registration FR292146_01UOMY.
FSC and recycled pulp paper can be sourced per order. We do not hold an FSC certificate of our own, so the box is described by its paper source rather than as a certified product.
Where It Is Made
Guangzhou Junye Packaging Industry Co., Ltd. has run its own rigid box plant in Baiyun District, Guangzhou since 2004, on about 5,000 square metres. Board forming, wrapping, rim setting and assembly happen on one site, which is why a change to the seam position or the rim height can be tested on a sample within the same building.
Main lines are mid to high end paper boxes, paper bags, hang tags and velvet pouches, all made to order on an OEM and ODM basis, with no stock catalogue. Browse the lid and base box range for other sizes of the same family.
Questions Buyers Ask
Is the rim visible when the box is closed?
No. The rim sits inside the tray wall and the lid skirt covers it, so the closed side shows one hairline seam and nothing else.
How many parts does the box have?
Three: the tray, the rim band and the lid. The rim has no floor and the lid has no bottom panel.
Can the size be changed?
Yes. 9 x 9 x 5 cm is standard and any size is made to order from 500 pcs; the structure stays the same.
Can I print my logo?
Yes, by foil, embossing, spot UV, silk screen or Pantone colour, on the lid top, the skirt or the inside of the tray.
What is the minimum order?
300 pcs for the standard size, 500 pcs for a custom size, 1,000 pcs for a new logo, colour or die.
Do you supply samples?
Artwork, mockup and die line are free; a physical sample is approved before the run starts.
Do you ship DDP?
Yes, door to door with duty paid, and Trade Assurance is the usual payment channel.
Which documents do you hold?
ISO 9001:2015 certificate ZYC24Q00141R1S, EU RoHS reports, LUCID DE2463045771631 and CITEO FR292146_01UOMY; FSC paper is sourced per order, not held as our own certificate.





















Reviews
There are no reviews yet.