More and more camera and camera manufacturers are looking for packaging factories to make Electronics Packaging Box for heaven and earth covers. In fact, this phenomenon releases a subtle message that flip boxes are gradually being eliminated. The advantages and disadvantages of flip boxes have been introduced many times in the previous information about the production of camera paper box. Junye camera packaging carton manufacturers have introduced it many times. Today, let’s talk with you, What should we pay attention to each of the two water caltrops in the heaven and earth cover.
The water chestnut mentioned by the manufacturer of the camera packaging carton is actually the way of slotting. We know that there are two kinds of slotting. The materials in the cardboard are cut from top to bottom, and there is no excess waste materials. Tearing along the incision of the cardboard material will become the corner of a paper electronic box, but if the torn crack is exposed outside, the crack can be blocked with paper mounting materials. The box structure of a camera paper box packaging factory is basically completed in this way; The other is the beer process commonly known as V-groove. When a V-shaped knife mold is pushed from the side of the paperboard to the other end, there will be redundant paperboard. The redundant paperboard comes out of the V-shaped knife mold, and then the paperboard material will become a state like a pit. This pit is V-shaped. Along this long V-shaped pit, the camera packaging carton manufacturer can combine the paperboard into a box shape, The lines of this pit are all inside the inner box, so it is not easy to be detected, and the outside also has very sharp corners.
Let’s first talk about the beer knife process. After receiving the box sent by the camera packaging carton manufacturer, the merchant should remember to check whether the edges and corners of the paper mounting are damaged or not, because this beer process, the broken paper mounting, the rough paper mounting, is difficult to distinguish from the normal paper mounting on the obtuse angle. Many times, even if it is not due to the printing process of high-end packaging boxes, the process of adding technology, There may be problems in the process of material integration and molding, or it may be extrusion during transportation, etc., which will lead to some problems in the water caltrop of this beer process. But if you don’t look carefully, it’s really difficult to identify it with the naked eye. It’s precisely because it’s originally like this, and it’s relatively round and blunt, so you must carefully inspect the goods.
On the contrary, if the camera paper box manufacturer makes V-slot boxes, don’t look at the problem of water chestnut carefully, because the corners of these cartons are straight and pricking, so you can see at a glance whether there is deformation or the paper mounting is damaged, so what should be paid attention to in this kind of carton? In fact, many little friends didn’t expect that whether the paper mounting at the bottom of the inner box is qualified and can completely cover the V-slot, because unlike the first beer method, the V-slot is that the intact side of the material is exposed outside, and the bad one is left inside. In fact, the inner box can see the traces left by the V-slot, that is, the material of the inner cardboard. Generally, the appearance of the inner material is not very good. If the paper mounting skill is not in place, It will seriously affect the consumer experience.
