Today, luxury jewelry box packaging manufacturers analyze that there are so many structural forms of cartons at present. Why are the outer packaging luxury boxes used for jewelry dominated by heaven and earth covers in the market? Basically, the box structure of the heaven and earth cover accounts for 99.9% of the market share. Are so many other box types uncompetitive? In fact, it is not. It is the market that makes the Jewelry Packaging Box manufacturers choose the heaven and earth cover. Now let’s analyze why boxes other than the heaven and earth cover can’t be listed in the elegant palace of jewelry.
1. Book box
The book type and this box type are the author’s favorite box type. Its structure is a floor cover, and then there is a cardboard with more than 3 knives at the bottom of the floor cover, which is used to cover the whole floor cover from the bottom, return to the side of the floor cover, and fix it with a magnet. According to the manufacturer of jewelry packaging box, this box type is actually more suitable for some more durable goods, such as flower glue, bird’s nest, tea, etc, Because this box type is a covered package, but there is a blind area, as shown in Figure 1. Like a tire, it only covers one side, and there is no rice seal on both sides. This is actually not suitable for jewelry, which can be directly imported without any treatment. Although the jewelry itself will also have a layer of packaging, it still lacks some safety, For example, the natural environment such as humidity can easily lead to changes in the quality of goods, which is one of the reasons why book type boxes are not selected for luxury jewelry box packaging.
2. Folding box
The structural form of the folding box is relatively special, because it is not wrapped by a fixed floor cover, but the manufacturer responsible for the customization of the packaging box also folds the whole floor cover. Like Figure 2, although it is flat, when it is formed, its structure is very similar to that of the book box, but its floor cover is glued and erected with a magnet, rather than having a fixed floor cover directly, Usually, this kind of box will be more “ventilated”, which is easier to be affected by the surrounding environment. Therefore, the fatal disadvantage of book type box is also one of the important reasons why jewelry packaging manufacturers do not choose folding boxes.
3. Flip box
Flip box is an exception. It still accounts for only 0.1% of the production list of jewelry packaging manufacturers, but this does not mean that all flip boxes are suitable for use in jewelry outer packaging color boxes, because the whole outer packaging color box in order to ensure the safety performance of the products inside, the reason why heaven and earth cover can press the flip box is because the sealing performance of heaven and earth cover is very high, and it is used for jewelry flip boxes, It must be with edges. Those without edges are actually like jewelry boxes, which rely on the rubber embryo to improve the covering ability and ensure the sealing, because the sealing with edges will be higher, but I don’t know if you found when opening the Pearl box that even after removing some adhesive tapes or paper stickers that were originally fixed, the probability of natural falling off and separation of the sky cover and the ground cover is still very low, but the flip box is different, When the fixed adhesive tape or paper sticker is removed, in turn, the probability of the canopy being opened is much higher. This is also because even if there is a surrounding edge between the canopy and the floor of the flip box, the floor that protrudes to contact the canopy is still very narrow. For example, the part protruding from the surrounding edge in Figure 3 is very short. In fact, the poor fixing effect is one of the reasons why the flip box has very few opportunities to meet with you.
4. Drawer box
If it is the customized effect of the general simple drawer luxury jewelry box packaging, it is difficult for the jewelry packaging box manufacturer to compare with the previous ones. If the sealing of the previous box types is not strong enough, then the sealing or convenience of the drawer box is very poor, so it is not selected by the market. First of all, it can be seen from Figure 4, In fact, the drawer box is nothing more than a heaven and earth cover pulled out from the side, which is exactly the case. It is a heaven and earth cover at the bottom. In fact, this kind of box is very rare in the design of heaven and earth cover, because it is troublesome to take it out and it is not practical enough. No matter the jewelry packaging box manufacturer or the products of other industries, it is rarely practical to use the heaven and earth cover at the bottom, and the drawer box is the heaven and earth cover at the bottom, Just add a very short ribbon in the bottom cover for extraction, but have you ever thought that the weight of several jewelry plus the weight of the inner support, plus the weight of each jewelry’s own inner packaging, using the small ribbon of the drawer box to extract it is a very laborious and inhuman design, that is, the drawer box is one of the biggest reasons why it is not suitable for the market compared with the previous three box types.
